Teledyne LeCroy Summit Z2-16 PCI Express Multi-lane Exerciser User Manual - Manual (Page 42)

Chapter 4: Traffic Generation Summit Z2-16 Exerciser User Manual
38
Teledyne LeCroy
Command Properties Window
The Command Properties window lists all possible parameters for the current script
command and all values for the parameters currently defined in this command. Entering
parameters/values within the Edit window causes the Command Properties window to
automatically update. Parameters/values can be changed by entering text into the text
boxes or by selecting items from pull-down menus as shown in the example below.
In this case, the edit window is updated automatically. If the current script command does
not have parameters or the current cursor position is outside of any script command, then
a generic prompt is displayed in the window: