3 switch downstream port dut, Switch downstream port dut – Teledyne LeCroy Protocol PCI Express Script Automation Test Tool User Manual
Page 16
Advertising
Teledyne LeCroy
PCI Express Script Automation Test Tool User Manual
12
11. Install the Teledyne LeCroy PETrainer Device Emulator driver for the Device Emulator card using the
installation instructions below.
12. Select Root Complex tests to execute.
2.4.3 Switch Downstream Port DUT
The Root Complex setup can also be used to test a downstream port of a Switch device.
Insert the Switch interface card in the PCI Express slot of the host PC. Insert the Device Emulator card in the
downstream slot on the Switch.
Otherwise, perform the same steps as in 2.4.2 Root Complex DUT.
Advertising