Teledyne LeCroy Verification Script Engine for Teledyne LeCroy PETracer Reference Manual - Manual (Page 20)

Teledyne LeCroy Verification Script Engine Reference Manual Version 6.6x
15
in.MsgErrorG3LenCheck : If set to a non-zero value, indicates a CRC-4 and/or Parity check failed on a Gen3
TLP length field (in framing, not the header). Note: This is a PCIE Gen 3 error.
in.BadLCRC
: Set to 1 if the TLP has bad LCRC, to 0 otherwise
in.BadECRC : Set to 1 if the TLP has bad ECRC (when it should be present), to 0 otherwise
Field values for all TLP types:
in.Type: Type of TLP field value
in.Fmt: Format of TLP field value
in.PSN: Packet Sequence Number for this TLP as set by the Data Link Layer
in. RequesterId: Requester ID value (Bus, Device and Function Number fields combined)
in.Tag:
Tag field value
in.TC:
Traffic Class field value
in.Snoop: Snoop attribute bit value
in.Ordering : Ordering attribute bit value
in.IDBasedOrdering : ID Based Ordering attribute bit value
in.Attributes : Attributes field value [all three bits (Snoop, Ordering, and IDBasedOrdering)]
in.TH : TLP Processing Hints bit value
in.TD: TLP Digest bit value
in.EP:
Poisoned TLP bit value
in.AT : Address Type field value
in.Length: Length field value
in.LCRC: LCRC value as set by the Data Link Layer
in.ECRC : ECRC value (optional)