Teledyne LeCroy SAS_SATA InFusion - Users Manual - Manual (Page 78)

Version 2.0 SAS InFusion User Manual
64
LeCroy Corporation
Step 4 The Event Properties dialog box appears (Figure 70). In the
Type column on the left, choose Timer. Set the timer for random
timing with a maximum time limit of 1.790 seconds.
Step 5 Click OK to close the Event Properties dialog box.
Step 6 Click on the prompt to add an action to correspond with the
second event (Figure 71).
Step 7 The Action Properties dialog box appears (Figure 72). In the
Type list on the left, choose Stop Scenario as the action you
want after the timer has expired.
Step 8 Click OK to close the Action Properties dialog box.
Step 9 In the File menu, select Save Scenario to save the scenario.
Figure 69 Example 6: Entering the Second Event