Teledyne LeCroy SATracer 3G Verification Script Engine manual - Manual (Page 41)

LeCroy Corporation Verification Script Engine Reference Manual Version 1.01
9.3 KillTimer()
Stops timing calculation for a specific timer and frees related resources.
Format : KillTimer( timer_id = 0)
Parameters:
timer_id – a unique timer identifier.
Example:
KillTimer(); # - stop timing for timer with id = 0;
KillTimer(23); # - stop timing for timer with id = 23;
9.4 GetTimerTime()
Retrieve the timing interval from the specific timer
Format :
GetTimerTime ( timer_id = 0)
Parameters:
timer_id – a unique timer identifier.
Return values:
Returns VSE time object from timer with id = timer_id.
Example:
GetTimerTime (); # - Retrieve timing interval for timer with id = 0;
GetTimerTime (23); # - Retrieve timing interval for timer with id = 23;
Remark :
This function, when called, does not reset the timer.
36