Teledyne LeCroy Detective - Users Manual - Manual (Page 46)

CATC CATC Detective User’s Manual Version 2.21
Page 43
4.9.1 Go to Packet...
When the “Go to Packet...” menu item (or the associated toolbar icon) is selected, the following
dialog box opens. To move quickly to a view of a specific packet, enter the packet number and
select OK; the display will be repositioned with the specified packet at the top.
4.9.2 Go To Marker
The “Go to Marker” menu item is only enabled when one of the packets in the traffic data file
has been marked (using the Packet Marker & Timing pop-up menu, described below). When the
item is selected, the display will be repositioned with the marked packet at the top.
4.9.3 Find...
The “Find...” menu item enables searching for specific bus events within the recorded data file.
The CATC analyzer will search for:
1. protocol violations:
•
bad PID (check field)
•
undefined PID
•
bad CRC5
•
bad CRC16
•
missing stuff bits
2. packets with specific PIDs (e.g., Setup)
3. bus transactions with specific device Ids
4. specific frame numbers
5. empty frames (with SOF token only)
6. non-empty frames (including one or more non-SOF fields)
7. specific bit strings in data fields
8. transactions with low speed devices (PRE)
9. reset conditions (SE0)
10. suspend & resume conditions