Teledyne LeCroy UWBTracer Verification Script Engine Manual - Manual (Page 35)

LeCroy Corporation Verification Script Engine Manual, version 2.2
9.10 DontSendTraceEvent()
This function specifies that the event specified in this function should not be sent to a script.
Format:
DontSendTraceEvent (event)
Parameters:
event See SendTraceEvent() for all possible values.
Example:
…
SendTraceEvent(_FRAMES); # Send all frames.
…
if(SomeCondition)
{
DontSendTraceEvent (_FRM_DATA); # Don’t send Data frames.
DontSendTraceEvent (_FRM_CONTROL); # Don’t send Control frames.
DontSendTraceEvent (_FRM_COMMAND); # Don’t send Command frames.
DontSendTraceEvent (_FRM_AGG_DATA); # Don’t send Agg Data frames.
DontSendTraceEvent (_FRM_OTHER); # Don’t send Other frames.
# Only Beacon frames are sent.
}
Page 35 of 95