Teledyne LeCroy PCIBX64-X - Manual (Page 15)

13
To convert the read data to voltage and current use the following equations:
Read Data (decimal) * 2.26 * 2.5/4096 = all voltages and currents in Volts and Amps, except 12V voltage.
Read Data (decimal) * 5.75 * 2.5/4096 = for 12V voltage only
15- Select +5V ramp:
Use the "Set Address" routine to set address
DUT 1 = 0x7c DUT2 = 0xfc
use write routine. 0x0 = slow; 0x1 fast