Asus ASMB3-SOL - Manual (Page 21)

ASUS ASMB3-SOL PLUS 2-7
2.3.3 Configure BMC IP source static IP
1. Repeat the step 1-4 in the previous sub-section.
2. On reboot, the main menu appears.Select Configure BMC IP Source Static
IP, and press <Enter> to enter the sub-menu.
ASUS Server RS162-E4/RX4 System
FreeDOS command prompt
ESB2 ASF Firmware Update
ESB2 IPMI Firmware Update
ASMB3-SOL PLUS Firmware Update
Configure BMC IP Source Static IP
Configure BMC IP Source DHCP
4. When the configuration is completed, the below screen appears.
3. A confirmation message appears, asking if you want to configure the BMC IP
source static IP now. Press <Y>.
Are you sure you want to configure BMC IP Source Static IP now?
Yes or No [YN]?
Detect Motherboard -> (DSBF-DR/SAS)
Detect KCS Interface
New BMC IP Source : Static IP
Press any key to continue ...
5. Go to BIOS menu to set the IP.