Teledyne LeCroy QPHY-SAS3 User Manual
Qphy-sas3 operator’s manual
Advertising
Table of contents
Document Outline
- INTRODUCTION to Qualiphy sas3
- USING QUALIPHY SAS3
- QUALIPHY COMPLIANCE TEST PLATFORM
- QPHY-SAS3 Test Configurations
- QPHY-SAS3 Variables
- QPHY-SAS3 Test Descriptions
- Tx Group 1 Out of Band Tests 5.1.x (OOB)
- Tx Group 2 Spread Spectrum Clocking Tests
- Tx Group 3 (Link Stability, Common Mode, … WDP)
- Tx 5.3.1 Phy Link Rate Stability (HFTP)
- Tx 5.3.2 Common Mode RMS Voltage (CJTPAT)
- Tx 5.3.3 Common Mode Spectrum (CJTPAT)
- Tx 5.3.4 and 5.3.5 Vpp, VMA, EQ (D30.3)
- Tx 5.3.6 Rise and Fall Times (HFTP)
- Tx 5.3.7 and 5.3.8 RJ, TJ (MFTP, MFTP-SSC-DOWN, MFTP-SSC-CENTER)
- Tx 5.3.9 Waveform Distortion Penalty (Not applicable for 12Gbps)
- Tx Group 4 Tx Emphasis
- How to run the SASWDP script
- How to run the SAS3_eyeopening script
- Appendix A: Cable Deskewing
- Appendix b: File name conventions for saved waveform data