Teledyne LeCroy WaveStation Waveform Generator Operators Manual - Manual (Page 15)

Operator’s Manual
922700-00 Rev A 9
B
NOTE: It's important to understand the relationship between the Main Waveform
Type buttons, the Waveform Signal Conditioning function buttons, and the
Save/Recall, Utility, and Help function buttons. See Combined Use of Waveform,
Function, and Configuration Buttons (on page 17).
Back Panel
1. Input and Output BNC Connectors - Four BNC Connectors provide 10
MHz In, Modulation In, Synch Out, Ext Trig/Gate/Fsk/Burst Out.
2. USB Connector - USB 2.0 connector which is used for making USBRAW
or USBTMC connections as explained in WaveStation PC Software
Overview (on page 64) and Controlling WaveStation with USB-GPIB
and/or USBTMC (on page 62), respectively.
3. Ground Connector
4. AC Power Connector