TIF 3220 Thermo-Anemometer and IR Thermometer - Manual

TIF3220
Thermo-Anemometer
with IR Thermometer
•
Simultaneous display or air flow (or velocity)
and ambient temperature.
•
Large backlit LCD display shows air flow (or
velocity), probe temperature, and remote
surface temperature (IR feature). Also displays
units of measurement and user alerts.
•
20-point averaging for air flow and velocity.
•
3% velocity accuracy using a low-friction ball
bearing vane wheel.
•
Data and MIN/MAX hold feature.
•
Selectable auto shutdown.
•
Includes a vane sensor with a 1.2m cable.
•
IR thermometer feature measures remote
surface temperatures to 932° F (500° C) with a
30:1 distance-to-spot ratio and laser pointer.
•
Up to 8 programmable dimensions (ft squared
or cm squared) can be stored in internal
memory.
KEYPAD BUTTONS
= Power ON or OFF.
IRT = Press and hold to measure remote
surface temperature.
MAX/MIN = Press to record and store the highest,
lowest, and continuous moving average
readings for a single point. This button
also functions as the left scroll button
when in Area mode.
UNITS = Press to select the mode of operation.
In Flow mode, the meter displays air
volume; in Velocity mode, the meter
displays air speed. This button also
functions as the UP scroll button when
in Area mode.
© 2008 SPX Sheet 1 of 2
FEATURES
APPLICATIONS
•
HVAC installation, repair, diagnostics, and
optimization
•
Fume hood testing, installation, and verification
•
Ventilation system installation, servicing, and
analysis
•
Environmental wind and temperature testing/
analysis
•
Boiler rooms
•
Ionizer flow output monitoring
•
Plant/Facilities Maintenance