TREND 963 User Guide - Manual (Page 62)

Using 963
963 User Guide TC200635 Issue 3 25/03/2008 62
3.8 Playback Recorded Data
If data from a sensor logged in a controller has been recorded by 963 the recorded information can be graphed:
To playback a recorded graph:
1. Display the graph for which recorded data is to be playedback.
2. On the Data recording menu click Load Recorded data. The 963 dialogue box is displayed.
3. Click Yes if the existing graph is to be recorded before the recorded data is displayed, click No if existing data is
to be not to be saved. If Yes was selected 963 will allow you to record the graph as described in the ‘Record a
Graph Manually’ section of this manual. Once the graph has been recorded the Data Retrieval Options
dialogue box is displayed goto (4). If No was selected the Data Retrieval Options dialogue box is displayed.
4. Select the required option to specify the source of the data. The table below describes the different options.
If 963 Database was selected the Data Retrieval Data Range dialogue box is displayed, goto (9). If
External 963 Database or External 963 Access Database was selected goto (5)
Option Description
963 Database
Data is retrieved from the 963’s database.
External 963 Access Database Data is retrieved from an access database used by pre v2.0 963
External 963 Database
Data is retrieved from an external 963 database e.g. data that has been archived.
5. Click Finish. The Data Retrieval File Source dialogue box is displayed.
6. Click Select data file. The Open dialogue box is displayed.