TREND NXL Variable Speed Drives - Manual (Page 8)

8 NXL Variable Speed Drives Data Sheet TA200620 Issue 1/G 13/06/07
NXL Data Sheet
SOFTWARE
Windows based PC utility tools are available for making the use
of the Trend NXL as easy and convenient as possible. The
software is intended for tasks such as commissioning, loading
of various applications, and block programming. The built-in Help
is available in all software. The minimum requirement for using
the software is a PC and the ACC/NXL/RS232PC serial cable, to
be connected to the RS232C terminal behind the control panel.
A standard RS232 cable should not be used.
NCDrive: NCDrive is an easy-to-use commissioning software
for the control of the NXL. NCDrive allows you to load parameters
from the drive, change them, save them in a file or load them back
to the drive, print the parameters on paper or to a file, set
references, start and stop the motor, monitor signals on a graphical
display and to monitor the actual values. You can also compare
sets of drive parameters in order to identify changed values.
In the PARAMETER window you can view, set and store
parameters as well as compare them to user-stored or default
values so that changed values are easily identified.
In the MONITOR window you can monitor a total of eight freely
user-specified variables simultaneously.
NCDrive requires a PC equipped with a Pentium II processor, 32
MB free RAM, 10 MB free disk space and Windows 95/98 or
2000.
NCLoad: This is a tool for loading the following software to the
drive:
a) system software (the operating system)
b) application software
c) option card software
NCLoad is mainly intended for use by variable speed drive
professionals and service personnel. In addition to the system
software, NCLoad is also suitable for loading custom-made
applications to the drive. The minimum hardware requirements
are those of NCDrive.
NC1131-3: A graphical design tool for custom applications using
block diagrams, ladder logic, or structured text to define the
application