Vanguard Resistor Transducer Adapter 9095-UC - Manual (Page 4)

CT-7500 S2 USER’S MANUAL REV 2
3
Adjusting the Screen Contrast
Follow the steps below to adjust the adapter’s screen contrast
a. From the “RUNNING” screen, press either the [▲] or [▼] key to access the Main Menu.
The following screen will be displayed:
Press the [▲] key to select the ADJUST CONTRAST option:
Press the [ENTER] key.
b. The following screen will be displayed:
Press the [▲] or [▼] key to adjust the screen contrast to the desired level and then
press the [ENTER] key. The “RUNNING” screen will be displayed again.
ADJUST CONTRAST
↑/↓ TO ADJUST
“ENTER” WHEN DONE
CALIBRATE ENCODER
<ADJUST CONTRAST>
DIAGNOSTIC
CALIBRATE ENCODER
ADJUST CONTRAST
<DIAGNOSTIC>