Vanguard Accu-Trans - Manual (Page 9)

Accu-Trans

Operating Procedures
5
3.0 CONTROLS AND INDICATORS
(See Figure 1 and refer to Table 1.)
Accu-Trans controls and indicators are
shown in Figure 1.0. A leader line with an
index number points to each control and
indicator, which is cross-referenced to a
functional description in Table 2. This table
describes the function of each item on the control-panel. The purpose of the controls
and indicators may seem obvious, but users
should become familiar with them before
using the Accu-Trans. Accidental misuse of
the controls will usually cause no serious
harm. Users should also be familiar with the
Safety Summary found on the front page of
this operator’s manual.
Figure 1.0 Accu-Trans Controls and Indicators