Vanguard Auto-Ohm - Manual (Page 16)

Auto-Ohm Operating Procedures
12
a. Press control knob to select this mode.
The user now can select any of the last three
reading to be displayed. To select the
reading, turn the control knob to one of the
menus.
Figure 24. Select Reading Menus
b. When one of the prompts above displays,
press the control knob to display reading.
Figure 25. Test Record Readout
c. The above display shows the recorded
test resistance (120.2 Micro-ohms) and the
test current level (100 amps) at which it was
measured. When the displayed record of
resistance is reviewed and noted, press the
control knob to return to the Main Menu.
This ends the PREVIOUS RESULTS
procedure.
This concludes the operating procedures for
all Auto-Ohm functions.
PREVIOUS RESULTS
<LAST TEST>
I= 100AMPS
120.2 MICRO-OHM
PREVIOUS RESULTS
<SECOND TO LAST>
PREVIOUS RESULTS
<THIRD TO LAST>