Vanguard Auto-Ohm 100_200 s2 - Manual (Page 10)

AUTO-OHM 100/200 Series 2 Operating Procedures
10
Rev 3, 2009
2.0 AUTO-OHM SPECIFICATIONS
2.1 Auto-Ohm 100 Series 2 Specifications
Table 1.0 Auto-Ohm 100 Series 2 Specifications
MODEL ...................... Auto-Ohm 100 Series 2
TYPE ............................. Special-Purpose Test Equipment, Portable, Low Resistance-Ohmmeter
CONFIGURATION...... Third-generation (improved design, superseding original model)
SIZE (inches) .............. 16.8 Wide by 12.6 High by 10.6 Deep (42.7 Cm x 32 Cm x 30.5 Cm)
WEIGHT........................ Less than 15 pounds (6.8 Kg)
OPERATING
VOLTAGE .................... 8 amps, 100-240 Vac, 50/60 Hz, with built in 10A circuit breaker
RESISTANCE
RANGE ......................... 1 micro-ohm to 300 milli-ohms
TEST CURRENT
RANGE ......................... 10 Amperes to 100 Amperes, Selectable in 2 ampere steps
DISPLAY ...................... Backlit LCD, 2-lines high by 16 characters Wide
ACCURACY................. ± 1 % of Reading, ± 1 Count
UNIT PROTECTION... thermal-overload sensor and cutoff
INTERFACE................. RS-232C Connector Port for PC Interface
ENVIRONMENT .......... Operating: 0°C to 55°C; Storage: -40°C to 65°C
FURNISHED ITEMS... One power cord, one ground cable, two 30-ft. test lead cables.
WARRANTY ................ One-Year Parts & Labor (Post-Warranty Service Contracts Available)
AUTO-OHM SPECIFICATIONS ARE SUBJECT TO UPGRADES AND MAY BE CHANGED WITHOUT PRIOR NOTICE.