Vanguard VCBA S2 (DigiTMR S2, DigiTMR S2 PC, CT-6500 S2, CT-7000 S2, CT-7500 S2, CT-8000) - Manual (Page 57)

REV 3 VCBA S2 VERSION 4.xx SOFTWARE MANUAL
54
3. Click on the “Export to File System” button. The following window will be displayed:
The “Folder” section at the top of the window displays the current folder where the test
plan will be saved to. If you would like to save the test plan in a different folder, click on
the folder icon at the top right of the window and then navigate to the desired folder.
Enter a filename for the test plan in the “Filename:” input field and then click on the
“OK” button. The test plan will be saved and can be used later to perform tests.
NOTE
Test plans exported to the file system will have the “.set” file extension. For
example, if you had named the file “test plan 1”, the complete file name will
be “test plan 1.set”.
4. Click on the “Export to Thumb Drive” button. The following window will be displayed:
Click on the “Thumb Drive” dropdown list and select the thumb drive connected to your
PC. In the “Record Number” field, enter the number that you would like to assign the