Vanguard PCI-600 - Manual (Page 15)

REV 2 PCI-600 USER’S MANUAL
12
e. Turn the [CURRENT CONTROL] knob clockwise to set the desired current. The
screen will be updated as shown below:
f. Release the
[↓]
key when the desired current is displayed on the screen.
g. Press the [↑] key to select "ON + TMR" mode and start the test:
h. The CT primary and secondary currents will be displayed as well as the polarity as shown
below:
NOTE
The External current polarity is shown either as in-phase (“+” sign) or out of
phase (“-” sign) with respect to the PCI-600's drive current.
i. Turn off the current source by pressing the [↓] key.
986mS 59.2CY
Ext I: -1.004 A
Drv I: 20.28 A
0mS 0.0CY
Ext I: -0.000 A
Drv I: 20.28 A