Vestil AIR-2000 - Manual

rev. 1/25/2013 AIR-2000-AIR, manual.doc
AIR-2000-AIR PNEUMATIC AND HYDRAULIC
DOUBLE-FUNCTION SCISSOR CART
I
NSTRUCTION
M
ANUAL
RECEIVING INSTRUCTIONS:
After delivery, IMMEDIATELY remove the packaging from the Hook-Base in a manner that preserves the
packaging and maintains the orientation of the product in the packaging; then inspect the product closely to
determine whether it sustained damage during transport. If damage is discovered during the inspection,
immediately record a complete description of the damage on the bill of lading. If the product is
undamaged, discard the packaging.
NOTES:
1) Compliance with laws, regulations, codes, and non-voluntary standards enforced in the location where the
product is used is exclusively the responsibility of the owner/end-user.
2) VESTIL is not liable for any injury or property damage that occurs as a consequence of failing to apply either:
a) Instructions in this manual; or
b) Information provided on labels affixed to the product. Neither is Vestil responsible for any consequential
damages sustained as a result of failing to exercise sound judgment while assembling, installing, using or
maintaining this product.
Table of Contents
Hazard identification: explanation of signal words…………………………………………………………………… 2
Safety Guidelines……………………………………………………………………………………………………….. 2
Product specifications by model……………………..………………………………………………………………… 3
Operation….………………………………… ………………………………………………………………………...3-4
Maintenance & Inspections……………………………………………………………............................................. 5
Troubleshooting……………………………………………………………………………………………………….. 6-7
Label placement diagram………………………………………………………………………………………………. 8
Limited warranty………………………………………………………………………………………………………9-10
V
ESTIL
M
ANUFACTURING
C
ORP
.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Fax: (260) 665-1339
www.vestilmfg.com e-mail: [email protected]
Copyright 2013 Vestil Manufacturing Corp. Page 1 of 10