Asante Technologies FH208B - Manual (Page 31)

Page B-1
B
Product Specifications
Dual-speed FriendlyNet Hub Specifications
Specification FH208/FH216 FH208B/FH216B
Standards Compliance IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Ethernet
Number of Ports Eight or 16, 10/100Mbps/Auto-sensing, RJ-45 Two MDI-II
Number of Segments Two independent segments - 10Mbps and 100Mbps
LED Display ❑ Power
❑ 10Mbps Collision
❑ 100Mbps Collision
❑ Link/Act
❑ 10M/100M/Auto-sensing
Switch
Media Dependant Interface Two MDI-II Uplink ports shared with ports 1 and 8
Stackable Hubs Up to three hubs dedicated DB-25 stack ports
Port Partitioning Automatic partitioning per port
Dual-speed Setting Four DIP switches may be set for 10Mbps,100Mbps or
Auto-sensing on MDI-II ports only
Switch Module Built-in module for
10Mbps, 100Mbps segment
communication
Power Requirements 100 to 240Vac, 50/60Hz
Environment Operating Temp: 0 to 50 C
Storage Temp: -30 to 60 C
Operating Humidity: 5% to 90% (non-condensing)
Safety Regulations CUL (UL & CSA) LVD