VIAIR 120 PSI Fast-Fill - Manual (Page 2)

IMPORTANT SAFETY INSTRUCTIONS:
CAUTION: To reduce risk of electrical shock or electrocution:
- Do not disassemble. Do not attempt repairs or
modifications. Refer to qualified service agencies for all
service and repairs.
- Do not use this product in or area where it can fall or be
pulled into water or other liquids.
- Do not reach for this product if it has fallen into liquid.
- Use this compressor with 12-volt DC systems only.
- This product should never be left unattended during use.
WARNING: To prevent injuries:
- Never allow children to operate this compressor.
Close supervision is necessary when this compressor
is being used near children.
- This compressor will become very hot during and
immediately after use. Do not touch any part of this
compressor with bare hands other than the
ON/OFF switch during and immediately after use.
- Do not use this product near flames or explosive
materials or where aerosol products are being used.
- Do not operate this product where oxygen is
being administered.
- Do not pump anything other than atmospheric air.
- Never use this product while sleepy or drowsy.
- Do not use any tools or attachments without first
determining maximum air pressure for that tool
or attachment.
- Never point any air nozzle or air sprayer toward
another person or any part of the body.
- This air compressor is equipped with an Automatic
Reset Thermal Protector, and can automatically restart
after the thermal protector resets. Always cut off power
source when thermal protector becomes activated.
- Wear safety glasses or goggles when operating this product.
- Use only in well ventilated areas.
120 PSI FAST-FILL AIR SOURCE KIT
USER MANUAL