VIAIR Tire Inflation Kit (00043) User Manual

Nflation, Perating, Nstructions

Advertising
background image

T

IRE

I

NFLATION

K

IT

P/N 00043

O

PERATING

I

NSTRUCTIONS

The VIAIR Tire Inflation Kit is used for airing up tires, and adding compressed air to any inflatable
item with a valve stem. The Tire Inflation Kit has a normally closed lever style air chuck at the end
of its rubber hose and includes a 30-foot hose and carry bag. After connection to an air source
such as an air tank via the quick connect stud preinstalled in the unit, air may be discharged from
the gun by simply squeezing the inflation trigger. To check air pressure, simply release the trigger
and check the onboard air pressure gauge.

1. Using the Tire Inflation Gun:
Using a 1/4“ Quick Coupler, connect the Tire Inflation Gun to an air hose and connect to a tire
valve stem or similar inflation collar by securing the folding lever on the Inflation Gun air chuck.
2. Filling Tires and other Inflatable Items:
Squeeze the Inflation Trigger on the Inflation Gun by pressing it towards the handle of the gun.
This will allow stored air from the air tank to flow through the gun and through the chuck into your
tire or other inflatable.
3. Checking Tire Pressure:
To check tire pressure, release Inflation Trigger on Inflation Gun and allow the needle of the
gauge to settle. Tire pressure will be able to be read only when the inflation trigger is released.
4. Storage:
Always store using the included deluxe carry bag to protect the inflation gun & hose.

WARNING:

Never operate the Inflation Gun at any pressure exceeding 150 PSI.

Use caution when attached or removing air chuck from valve stems.

Always ensure that tire valve stems are tight before inflating tires.

Never inflate any tire or other inflatable past its rated pressure to avoid explosion, or
possible injury or death.

WARNING: Not intended for use with regular portable compressors (units meant to be operated
with an open ended air chuck). The Tire Inflation Gun is equipped with a close-ended chuck (will
hold pressure back).
WARRANTY: This product is warranted to be free from defects in workmanship or material for a
period of one year from provided date of purchase.

For more information:

www.viaircorp.com/warranty

VIAIR CORPORATION

15 EDELMAN

IRVINE, CA 92618

TEL: (949) 585-0011 • FAX: (949) 585-0188

TOLL FREE: (800) 618-1994

www.viaircorp.com

Advertising