WansView NCM628W - Manual (Page 8)

7
Figure 2
1) Click “Search”（ Please make sure your firewall will not block up the item to be
searched ）
2) Choose a camera;
3) Change the ip address of the ip camera according to the information in the red
frame on the left. The numbers in the red circle should not be the same. The
Http port should be a number between 80~65535;
4) Enter user name and password for the device, the default is “admin” and
“123456” ;
5) Click “update”;
6) After updating successfully, click “Search (F3)”, choose the device again and
click “Browse (F4)”. Then you can run the web browser, enter user name and
password and login IP camera to view the video, example of figure 3.（
please
use IE browser at first time ）
Figure 3