WARN S-12 Series Spydura ProMax - Manual (Page 2)

DC Electric
12 Volt
Series Wound
WARN Industrial Winch
Model Part Number Motor Type
Series 12-S
Spydura ProMax
DC Electric Winch
Manual Clutch
91043
outline drawing
Electrical System Wiring Schematic
Units are given in inches [millimeters], unless otherwise specified
Pull from bottom of winch Pull from bottom of winch Pull from top of winch
Recommended Mounting- Always Observe Correct Drum Rotation Electrical System Specifications
Pull from top of winch Pull from top of winch Pull from top of winch
Motor / Contactor may be rotated in 90 degree increments. Clutch housing may be rotated in 72 degree increments.
schematic
650 CCA Battery Minimum
See Electrical Cable Gauge Size Chart for cable sizing
All electrical connections must be clean and tight
Feet down Feet forward Feet forward
image image image
12900 S.E. Capps Road,
Clackamas, OR USA 97015
Customer Service (North America): 1.800.543.9276
Customer Service (International): 1.503.722.3008
FAX: 1.503.722.3000 www.warn.com
WARN INDUSTRIES, INC
Industrial Products
Feet down without angle brace Feet down with angle brace Angle Braces Only
Notes:
image image image
988118.A0 09/2013