Warner Electric Brushholder Assembly and Mounting Dimensions - Manual

Warner Electric Brushholder
Assembly and Mounting Dimensions
Installation Instructions
P-1369
819-0032
2
0.56
(14.22)
0.75
(19.05)
1.41
(35.81)
1.56
(39.69)
0.78
(19.84)
1.72
(42.69)
1.34
(34.03)
By
Customer
By
Customer
1.88
(47.8)
1.31
(33.34)
0.75
(19.05)
0.38
(9.53)
0.75
(19.05)
0.38
(9.53)
0.188
(4.78)
4 holes tapped for #8-32 screws
(by customer) to enter brushholder
case 0.31 (7.87) max.
Rotation
1/2 standard
straight pipe
tap 0.391 (9.93)
deep
Dimension “A” for collector ring: 5301-101-001 is 4.00 (101.6)
to of shaft. 5301-749-001 is 5.75 (146.05) to of shaft.
Brushholder may be mounted at one end opposite conduit or
from either side. It is recommended that brushes be assembled
so that the arrow on brushes points in the direction of rotation
of the collector ring, however brushholder may be used with
reversing clutch.
Dim.
“A”
1.03
(26.16)
0.28
(7.11)
1
Alternate Mounting
0.188 (4.76) dia. 2 holes thru
screws and nuts by customer
1
2 5300-178-001 Brushholder Assembly
176-0001
Brush
Warner Electric • 800-825-9050 P-1369 • 819-0032