Grill – Anetsberger Brothers MG User Manual

Page 11

Advertising
background image

11

GRILL

GRILL

GRILL

GRILL

GRILL TR

TR

TR

TR

TROUBLESHOO

OUBLESHOO

OUBLESHOO

OUBLESHOO

OUBLESHOOTING GUIDE

TING GUIDE

TING GUIDE

TING GUIDE

TING GUIDE

(Continued)

1. Check that gas control valve is set to

“ON”.

2. Check that pilots are burning.

3. Increase temperature setting on

thermostat control.

4. Check gas supply pressure with all other

equipment operating. (6” WC for natural
gas and 11” WC for propane, minimum)

5. Observe if main burners ignite.

1. Yes - Proceed to test #2.

No - Turn to “ON” and skip to
test #5.

2. Yes - Proceed to test #3

No - Follow lighting instructions
on page 7. Skip to test #5.

3. Proceed to test #4.

4. Increase if needed, proceed to
test #5.

5. Yes - Okay.

No - Replace gas control valve.

PROBLEM

CAUSE

REMEDY

1. Turn thermostat control to “OFF”.

Observe if main burners go off.

2. Turn gas control valve knob to “OFF”.

Observe if main burners go off.

3. Reset thermostat control to desired

setting. Observe if main burners go off
when temperature is reached.

1. Yes - Skip to test #3.

No - Proceed with test #2.

2. Yes - Proceed with test #3.

No - Replace gas control

valve.

3. Yes - Okay.

No - Replace thermostat.

Main burners do not
ignite.

Over temperature or
main burners do not
stop burning.

Grill plate is cold
(Burners not
firing).

1. Check that gas supply is turned on.

2. Check for lit pilot.

3. Check that gas control valve is in “ON”

position.

4. Check that thermostat control is at

desired setting.

1. Yes – Proceed to test #2.
No – Turn on, follow
Lighting Instructions on
page 7. Skip to test #4.

2. Yes – Proceed to test #3
No – Follow Lighting
Instructions on page 7. Skip
to test #6.

3. Yes – Proceed to test #4.
No – Turn to “ON”. Skip to
test #6.

4. Yes – Proceed to test #5.
No – Increase setting.
Proceed to test #5.

Advertising
This manual is related to the following products: