Atlantis Land A02-RA440 - Manual (Page 36)

ENGLISH
36
These are configuration parameters:
• Virtual Circuit: Enable
• VPI: 0 or 1 (check with your ISP)
• VCI: 38 or 50 (check with your ISP)
• NAT: Enable
• Username: Enter the username provided by your
ISP(case sensitive).
• Password: Enter the password provided by your ISP
(case sensitive).
• Service Name: This item is for identification purposes. If
it is required, your ISP will provide you the information.
• IP Address:0.0.0.0
• Authentication Protocol Type: Default is Chap (Auto).
Your ISP will advise you whether to use Chap or Pap.
• Connection: Chose Always On If you want the router
to establish a PPPoE/A session when starting up and to
automatically re-establish the PPPoE/A session when