IEI Integration ROCKY-3786 v4.0 - Manual (Page 78)

78
IEI ® Technology, Corp.
Step 1: Properly orient the cooling kit. Be sure the cooling kit is properly oriented before
attaching the mounting clips. The levered cooling kit mounting clip should be
aligned with the connecting tabs of the CPU socket closest to the DIMM socket.
Step 2: Attach the unlevered mounting clip first. Slip the unlevered mounting clip under
the connecting tab of the CPU socket. (See Figure 4-3)
Step 3: Secure the cooling kit in place. Gently push the levered mounting clip down with
a slight inward movement to snap it into place under the connecting tab. (See
Figure 4-3)
Step 4: Connect the fan cable. Connect the cooling kit fan cable to the fan connector on
the CPU card. Carefully route the cable and avoid heat generating chips and fan
blades. Step 0:
Figure 4-3: Install the CPU cooler