3 dimm installation, Figure 4-6: dimm installation – IEI Integration PCIE-Q57A User Manual
Page 53
Advertising
PCIE-Q57A PICMG 1.3 CPU Card
Page 41
4.4.3 DIMM Installation
To install a DIMM, please follow the steps below and refer to Figure 4-6.
Figure 4-6: DIMM Installation
Step 1:
Open the DIMM socket handles. Open the two handles outwards as far as
they can. See Figure 4-6.
Step 2:
Align the DIMM with the socket. Align the DIMM so the notch on the memory
lines up with the notch on the memory socket. See Figure 4-6.
Step 3:
Insert the DIMM. Once aligned, press down until the DIMM is properly seated.
Clip the two handles into place. See Figure 4-6.
Step 4:
Removing a DIMM. To remove a DIMM, push both handles outward. The
memory module is ejected by a mechanism in the socket.
Step 0:
Advertising