IEI Integration PCIE-H610 - Manual (Page 66)

PCIE-H610 PICMG 1.3 CPU Card
Page 51
4.5.2 DVI-D/USB Kit Installation (DVI Model Only)
The DVI-D/USB kit, consisting of one DVI-D and four USB ports, connects to the DVI-D
and USB connectors on the PCIE-H610. To install the DVI-D/USB kit, please follow the
steps below.
Step 1: Connect the cables to the DVI-D/USB kit. Connect the included cables to the
DVI-D/USB kit.
Step 2: Connect the cables to the board. Connect the other ends of the included
cables to the board.
Figure 4-11: DVI-D/USB Kit Installation
Step 3: Mount the DVI-D/USB kit onto the chassis. Once the DVI-D/USB kit is
connected to the board, secure the DVI-D/USB kit bracket to the system
chassis.