IEI Integration PCISA-945GSE v1.01 - Manual (Page 83)

PCISA-945GSE CPU Card
Page 65
contact the PCISA-945GSE vendor reseller/vendor where the PCISA-945GSE was
purchased or contact an IEI sales representative.
5.4 CF Card Installation
NOTE:
The PCISA-945GSE can support both CF Type I cards and CF Type II
cards. For the complete specifications of the supported CF cards
please refer to Chapter 2.
To install the a CF card (Type 1 or Type 2) onto the PCISA-945GSE, please follow the
steps below:
Step 1: Locate the CF card socket. Place the PCISA-945GSE on an anti-static pad
with the solder side facing up. Locate the CF card.
Step 2: Align the CF card. Make sure the CF card is properly aligned with the CF
socket.
Step 3: Insert the CF card. Gently insert the CF card into the socket making sure the
socket pins are properly inserted into the socket. See Figure 5-1. Step 0: