IEI Integration PCISA-9652 v1.00 - Manual (Page 104)

PCISA-9652 Half-Size CPU Card
Page 84
5.4.1 CF Card Setup
Jumper Label: JCF1
Jumper Type: 2-pin header
Jumper Settings: See Table 5-2
Jumper Location: See Figure 5-8
The CF Card Setup jumper sets the CF Type I card or CF Type II cards as either the slave
device or the master device. CF Card Setup jumper settings are shown in Table 5-2.
CF Card Setup Description
Open Slave Default
Closed Master
Table 5-2: CF Card Setup Jumper Settings
The CF Card Setup jumper location is shown in Figure 5-8.
Figure 5-8: CF Card Setup Jumper Location