IEI Integration PX-10S-RS v1.02 - Manual (Page 5)

Connectors
CONNECTOR DESCRIPTION
ISA2/PCI1 & ISA4/PCI2 PICMG connectors
PCI3-PCI9 32-BIT PCI BUS connectors
ISA1,ISA3 16-BIT ISA BUS connectors
PW1 P8/P9 power connector
PW2 ATX power connector
CN1 DC power outlet
CN2 ATX P/S control connector
CN3,CN5 Fan connector
CN4 Power good signal output
Pin Assignment
Power Extension(CN1)
PIN NAME
1 +5V
2 -5V
3 -12V
4 +12V
5 GND
ATX(PW2)
PIN NAME PIN NAME
1 +3.3V 11 +3.3V
2 +3.3V 12 -12V
3 GND 13 GND
4 +5V 14 PS_ON
5 GND 15 GND
6 +5V 16 GND
7 GND 17 GND
8
PWR
OK
18 -5V
9 STB5V 19 +5V
10 +12V 20 +5V
Installation Guide
Chassis
Make sure the copper lifting stands are placed below all the mounting holes of your backplane.
SBC
Apply only one full-sized SBC over PICMG slot or half-sized SBC over ISA slot.
Apply your ISA/PCI cards over ISA/PCI slot (Image 1).
Power Supply
1.If you use AT power supply, attach the P8/P9 connector to PW1 (Image. 2).
2.If you use ATX power supply, attach the 20-pin ATX power connector to PW2 (Image. 3).
Besides, you need to apply one 3-pin ATX power control cable between your SBC and backplane
4 PX-10S User’s Manual
P8/P9(PW1)
PIN NAME
1 PWR OK
2 +5V
3 +12V
4 -12V
5 GND
6 GND
7 GND
8 GND
9 -5V
10 +5V
11 +5V
12 +5V
ATX control connector(CN2)
PIN NAME
1 STB5V
2 PS_ON
3 GND
Fan connector(CN3,CN5)
PIN NAME
1 NC
2 +12V
3 GND
Power Good output(CN4)
PIN NAME
1 Power Good
2 GND