IEI Integration ICE-945GSE v1.01 - Manual (Page 36)

ICE-945GSE COM Express Type 2 Module
Page 24
Figure 4-2: Connector and Jumper Locations
4.1.2 Peripheral Interface Connectors
Table 4-1 shows a list of the interface connectors on the ICE-945GSE Detailed
descriptions of these connectors can be found in Section 4.2.
Connector Type Label
COM Express connector CD COM Express connector J1
COM Express connector AB COM Express connector J2
SO-DIMM socket SO-DIMM socket DIMM1
SPI programming connector 6-pin connector SPI1
Table 4-1: ICE-945GSE Interface Connectors
4.2 ETX Interface Connectors
The ICE-945GSE embedded module has standard four standard ETX interface
connectors on the reverse side of the board. The location of the pins and the pinout
descriptions are given below.