IEI Integration IEM-945GSE - Manual (Page 70)

IEM-945GSE ETX 3.0 Module
Page 58
6.3.3 Super IO Configuration
Use the Super IO Configuration menu (
5
BIOS Menu 6) to set or change the
configurations for the FDD controllers, parallel ports and serial ports.
BIOS Menu 6: Super IO Configuration
ƒ Serial Port1 Address [3F8/IRQ4]
Use the Serial Port1 Address option to select the I/O and IRQ base addresses.
Î
Disabled No base address is assigned to Serial Port 1
Î
3F8/IRQ4 D EFAULT I/O port address is 3F8 and the interrupt address is IRQ4
Î
3E8/IRQ4 I/O port address is 3E8 and the interrupt address is IRQ4
Î
2E8/IRQ3 I/O port address is 2E8 and the interrupt address is IRQ3
ƒ Serial Port1 Mode [Normal]
Use the Serial Port1 Mode option to select the transmitting and receiving mode.