IEI Integration eKINO-945GSE v1.12 - Manual (Page 85)

eKINO-945GSE Motherboard
Page 69
Before the eKINO-945GSE is installed in the system, the jumpers must be set in
accordance with the desired configuration. The jumpers on the eKINO-945GSE are listed
in
8
Table 5-1.
Description Type Label
ATX control 2-pin header ATXCTL1
Clear CMOS 3-pin header J_CMOS1
CompactFlash® master/slave 2-pin header J_CF1
COM3 RS-232/422/485 selector 6-pin header JP1
LCD panel type selector 8-pin header J_LCD_TYPE1
LCD voltage selector 3-pin header J_VLVDS1
UPS enable/disable 2-pin header JP3
UPS/Battery mode selection 3-pin header J_U/B1
Table 5-1: Jumpers