IEI Integration KINO-G410 v1.03 - Manual (Page 83)

KINO-G410 Mini-ITX Motherboard
Page 71
Serial Port6 IRQ [IRQ10]
Use the Serial Port6 IRQ option to select the Serial Port 6 interrupt address.
IRQ10 D EFAULT IRQ10 is assigned as the Serial Port 6 interrupt address
IRQ11 IRQ11 is assigned as the Serial Port 6 interrupt address
Parallel Port Address [378]
Use the Parallel Port Address option to select the parallel port base address.
Disabled No base address is assigned to the Parallel Port
378 D EFAULT Parallel Port I/O port address is 378
278 Parallel Port I/O port address is 278
3BC Parallel Port I/O port address is 3BC
Parallel Port Mode [Normal]
Use the Parallel Port Mode option to select the mode the parallel port operates in.
Normal D EFAULT The normal parallel port mode is the standard mode
for parallel port operation.
Bi-directional Parallel port outputs are 8-bits long. Inputs are
accomplished by reading 4 of the 8 bits on the
status register.
EPP The parallel port operates in the enhanced parallel
port mode (EPP). The EPP mode supports
bi-directional communication between the system
and the parallel port device and the transmission
rates between the two are much faster than the
Normal mode.