IEI Integration KINO-PV-D4252_D5252 - Manual (Page 80)

KINO-PV-D5252/D4252 Mini ITX SBC
Page 66
4.9.2 LAN Connection (Dual Connector)
There are two external RJ-45 LAN connectors. The RJ-45 connector enables connection
to an external network. To connect a LAN cable with an RJ-45 connector, please follow
the instructions below.
Step 1: Locate the RJ-45 connectors. The location of the LAN connector is shown in
Chapter 3.
Step 2: Align the connectors. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the KINO-PV-D5252/D4252. See Figure 4-16.
Figure 4-16: LAN Connection
Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the on-board RJ-45 connector. Step 0:
4.9.3 Serial Device Connection
The KINO-PV-D5252/D4252 has a single female DB-9 connector on the external
peripheral interface panel for a serial device. Follow the steps below to connect a serial
device to the KINO-PV-D5252/D4252.