IEI Integration KINO-AQ670 - Manual (Page 72)

KINO-AQ670
P a g e 58
Figure 4-19: USB Connector
4.6.7 VGA Mo n ito r Co n n e c tio n
The KINO-AQ670 has a single female DB-15 connector on the external peripheral
interface panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect
a monitor to the KINO-AQ670, please follow the instructions below.
S te p 1: Locate the female DB-15 connector. The location of the female DB-15
connector is shown in Chapter 3.
S te p 2: Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
S te p 3: Insert the VGA connector. Once the connectors are properly aligned with the
insert the male connector from the VGA screen into the female connector on the
KINO-AQ670. See Figure 4-20.