IEI Integration KINO-CVR-D25502_N26002 - Manual (Page 65)

KINO-CVR-D25502/N26002
P a g e 53
Figure 4-9: USB Connector
4.6.6 VGA Mo n ito r Co n n e c tio n
The KINO-CVR-D25502/N26002 has a single female DB-15 connector on the external
peripheral interface panel. The DB-15 connector is connected to a CRT or VGA monitor.
To connect a monitor to the KINO-CVR-D25502/N26002, please follow the instructions
below.
S te p 1: Locate the female DB-15 connector. The location of the female DB-15
connector is shown in Chapter 3.
S te p 2: Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
S te p 3: Insert the VGA connector. Once the connectors are properly aligned with the
insert the male connector from the VGA screen into the female connector on the
KINO-CVR-D25502/N26002. See Figure 4-10.