IEI Integration IMB-C2060 v2.00 - Manual (Page 38)

IMB-C2060 microATX Motherboard
Page 24
CN Location: See Figure 3-9
CN Pinouts: See Table 3-10
The FW Programming connector is used for programming the firmware.
Figure 3-9: FW Programming Connector Location
Pin Description Pin Description
1 +3.3V 2 TDO
3 TDI 4 NC
5 NC 6 TMS
7 GND 8 TCK
Table 3-10: FW Programming Connector Pinouts
3.2.9 Infrared Interface Connector
CN Label: IR1
CN Type: 5-pin header
CN Location: See Figure 3-10
CN Pinouts: See Table 3-11
The infrared connector attaches to an infrared receiver for use with remote controls.