5 usb – IEI Integration IMBA-XQ354 v1.00 User Manual
Page 113
IMBA-XQ354 Motherboard
Page 93
Figure 5-21: Serial Device Connector
Step 3:
Secure the connector. Secure the serial device connector to the external
interface by tightening the two retention screws on either side of the connector
.
Step 0:
5.6.5 USB
The external USB Series "A" receptacle connectors provide easier and quicker access to
external USB devices. Follow the steps below to connect USB devices to the
IMBA-XQ354.
Step 1:
Locate the USB Series "A" receptacle connectors. The location of the USB
Series "A" receptacle connectors are shown in Chapter 3.
Step 2:
Insert a USB Series "A" plug. Insert the USB Series "A" plug of a device into
the USB Series "A" receptacle on the external peripheral interface. See
960H960H
Figure 5-22.
Step 0: