IEI Integration IMBA-H610 - Manual (Page 74)

IMBA-H610 ATX Motherboard
Page 59
Figure 4-13: DVI Connector
Step 4: Secure the connector. Secure the DVI-D connector from the digital display
device to the external interface by tightening the two retention screws on either
side of the connector. Step 0:
4.5.3 LAN Connection
There are two external RJ-45 LAN connectors. The RJ-45 connectors enable connection
to an external network. To connect a LAN cable with an RJ-45 connector, please follow
the instructions below.
Step 1: Locate the RJ-45 connectors. The locations of the USB connectors are shown
in Chapter 4.
Step 2: Align the connectors. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the IMBA-H610. See Figure 4-14.