IEI Integration IMBA-Q670 v3.01 - Manual (Page 101)

IMBA-Q670 ATX Motherboard
Page 83
5.3.5 SATA Configuration
Use the SATA Configuration menu (BIOS Menu 8) to change and/or set the
configuration of the SATA devices installed in the system.
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Advanced
SATA Controller(s)
[Enabled]
SATA Mode [AHCI Mode]
Enable or disable SATA
device
---------------------
ÅÆ: Select Screen
↑ ↓: Select Item
Enter
Select
+ - Change Opt.
F1 General
Help
F2 Previous Values
F3 Optimized Defaults
F4 Save & Exit
ESC Exit
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 8: SATA Configuration
Î SATA Controller(s) [Enabled]
Use the SATA Controller(s) option to enable or disable the SATA controller on the
system.
Î
Enabled D EFAULT SATA controller enabled
Î
Disabled SATA controller disabled
Î SATA Mode [AHCI Mode]
Use the SATA Mode option to configure SATA devices as normal IDE devices.
Î
IDE Mode Configures SATA devices as normal IDE device.
Î
AHCI Mode D EFAULT Configures SATA devices as AHCI device.
Î
RAID Mode Configures SATA devices as RAID device.