IEI Integration NANO-9452 v1.00 - Manual (Page 104)

NANO-9452 EPIC Motherboard
Page 86
Quantity Type
1 IDE Cable
1 KB/MS cable
2 SATA drive cables
1 SATA drive power cable
Table 5-8: IEI Provided Cables
Optional cables are listed below:
USB cable
TV out cable
RS-232/422/485 cable
LPT cable
RS-232 cable
7.1 channel audio kit
5.1 channel audio kit
5.6.2 IDE Cable Connection
The IDE flat cable connects to the NANO-9452 to one or two IDE devices. To connect an
IDE HDD to the NANO-9452 please follow the instructions below.
Step 1: Locate the IDE connector. The location/s of the IDE device connector/s is/are
shown in Chapter 3..
Step 2: Insert the connector. Connect the IDE cable connector to the onboard
connector. See Figure 5-15. A key on the front of the cable connector ensures it
can only be inserted in one direction.