IEI Integration NANO-9452 v1.12 - Manual (Page 97)

NANO-9452 EPIC Motherboard
Page 79
AT Power Select Description
Short 2-3 +5V LVDS
Table 5-5: LVDS Voltage Selection Jumper Settings
The LVDS Voltage Selection jumper location is shown in Figure 5-12.
Figure 5-12: LVDS Voltage Selection Jumper Pinout Locations
5.4.5 PCI-104 VIO Selector Jumper
Jumper Label: JP2
Jumper Type: 3-pin header
Jumper Settings: See Table 5-6
Jumper Location: See Figure 5-13
The PCI-104 VIO Selector jumper allows the PCI-104 voltage to be set. The PCI-104 VIO
Selector jumper settings are shown in Table 5-5.
AT Power Select Description
Short 1-2 5 V
Short 2-3 3.3 V
Table 5-6: PCI-104 VIO Selector Jumper Settings
The PCI-104 VIO Selector jumper location. is shown in Figure 5-12.