IEI Integration NOVA-PV-D4251_D5251 v1.01 - Manual (Page 102)

NOVA-PV-D5251/D4251 5.25" SBC
Page 88
4.8.2 Serial Device Connection
The NOVA-PV-D5251/D4251 has a single female DB-9 connector on the external
peripheral interface panel for a serial device. Follow the steps below to connect a serial
device to the NOVA-PV-D5251/D4251.
Step 1: Locate the DB-9 connector. The location of the DB-9 connector is shown in
Chapter 3.
Step 2: Insert the serial connector. Insert the DB-9 connector of a serial device into
the DB-9 connector on the external peripheral interface. See Figure 4-22.
Figure 4-22: Serial Device Connector
Step 3: Secure the connector. Secure the serial device connector to the external
interface by tightening the two retention screws on either side of the connector.
Step 0: