IEI Integration NOVA-PV-D4251_D5251 v1.10 - Manual (Page 102)

NOVA-PV-D5251/D4251 5.25" SBC
Page 86
4.8 External Peripheral Interface Connection
The following external peripheral devices can be connected to the external peripheral
interface connectors.
ƒ HDMI devices
ƒ RJ-45 Ethernet cable connector
To install these devices, connect the corresponding cable connector from the actual
device to the corresponding NOVA-PV-D5251/D4251 external peripheral interface
connector making sure the pins are properly aligned.
4.8.1 LAN Connection
There are two/four external RJ-45 LAN connectors. The RJ-45 connector enables
connection to an external network. To connect a LAN cable with an RJ-45 connector,
please follow the instructions below.
Step 1: Locate the RJ-45 connectors. The locations of the LAN connectors are shown
in Chapter 3.
Step 2: Align the connectors. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the NOVA-PV-D5251/D4251. See Figure 4-21.
Figure 4-21: LAN Connection